simpleprojectus Bathroom Fixtures Buying Guide — Part 10: Ocean Luster Models and Features Compared

What these Ocean Luster bundles have in common

Across this group, the look and function stay consistent so your choice comes down to layout and finish.

• Shower door: Single‑sliding frameless door that adjusts to 56–60 in width and stands ~75 in tall; 5/16 in (8 mm) ANSI‑certified tempered glass; reversible left/right installation; install kit included.

• Shower base: Single-threshold SMC fiberglass‑reinforced pan with non‑slip surface; center drain opening (~4.3 in), drain and flange included; available in 60x30, 60x32, or 60x36 to match common alcove footprints.

• Medicine cabinet (in many Left variants): 36x24 in aluminum cabinet with dimmable tri‑color LED (3000K/4500K/6500K), quick defogger, interior motion light, soft‑close hinges, built‑in outlets and USB, and a UL‑listed plug; install recessed or surface‑mounted.

• Upflush macerating toilet: 600W unit with dual flush (about 0.8/1.28 GPF), rated up to ~29 ft vertical and ~295 ft horizontal discharge; accepts additional fixtures (sink/shower/tub/washer) via 1‑1/2 in inlets; listed noise guidance ~35–45 dBA.

What actually changes between SKUs

Three choices separate the models in this set:

• Vanity shelf orientation: Left vs Right. Pick the side with open shelving to face clear space (not a wall or toilet) so you can actually use the shelves.
• Shower door finish: Matte Black, Brushed Gold, or Brushed Nickel—all use the same 5/16 in tempered glass and reversible track system. Choose the finish that matches your faucets and trim.
• Shower base size: 60x30 (typical tub‑to‑shower conversions), 60x32 (more shoulder room), or 60x36 (largest footprint). All are center‑drain with included drain/flange. Some SKUs include the base size in the bundle; others offer the door/vanity set without a base—check the model name below.

How to choose for your layout (quick rules)

• Left vs Right shelf: Stand where the vanity goes and note which side has clearance. If a wall, door casing, or toilet sits on the left, choose a Right‑shelf model, and vice versa.
• Shower door fit: Measure the finished opening tile‑to‑tile. These doors adjust 56–60 in and are reversible—pick your overlap so the inner panel is on the shower‑head side to reduce splash.
• Curb and leak control: Pitch the curb slightly toward the shower. Use the included vertical seals and consider a low-profile dam at the threshold if splash persists in high‑pressure setups.
• Base size and drain: Verify your framed alcove depth (30/32/36 in) and center drain location before ordering. The included drain and flange simplify install.
• Medicine cabinet mounting: For recessed install, plan a cutout near 35.4 in W x 23.2 in H x 4.1 in D. If studs/vent stacks interfere, surface‑mounting keeps the features without opening the wall.
• Power and code: Place a GFCI‑protected receptacle for the cabinet and macerator per local electrical code; confirm venting and discharge routing with your inspector.

Specs that matter—and how they compare to familiar brands

Shower door: The CALYZ single‑slider’s 5/16 in (8 mm) tempered glass and 56–60 in adjustability align with mainstream options from DreamLine and Delta, and ANSI safety glazing is the common performance mark for this class. The door is reversible to suit your layout.

Shower base: The SLYDO single‑threshold base uses SMC fiberglass‑reinforced construction with a non‑slip surface and includes the drain and flange, simplifying a 60‑in alcove conversion.

Lighted medicine cabinet: The 36x24 unit offers tri‑CCT dimmable lighting, a quick defogger, motion lighting, soft‑close hardware, and a UL‑listed plug—feature‑for‑feature competitive with well‑known lighted cabinets; it can be recessed or surface‑mounted with the published cutout.

Macerating upflush: The 600W unit’s published reach (up to ~29 ft vertical/~295 ft horizontal) sits above typical listings from familiar macerator lines (often 15–25 ft vertical/~150 ft horizontal). As with any pump, plan your exact run using head‑loss and local code, provide GFCI‑protected power in a bathroom, and follow the manufacturer’s installation manual.

Fit and installation notes most shoppers ask about

• Door width and walls: The 56–60 in door kits include out‑of‑plumb adjustments, but highly uneven walls or surrounds may need shimming/blocking. Confirm your finished surfaces before drilling.
• Glass safety: The slider uses ANSI‑certified tempered glass; architectural glazing in baths also references CPSC 16 CFR Part 1201 for safety standards—check markings on the glass at delivery.
• Shower base details: Single threshold; SMC fiberglass‑reinforced with grid backing; center drain opening ~4.3 in; non‑slip surface; drain and flange included.
• Cabinet wiring: The 36x24 cabinet uses a UL‑listed plug; place a GFCI‑protected receptacle per bathroom code. The cabinet can be surface‑mounted when recessing between studs isn’t feasible.
• Macerator plumbing: The 600W upflush accepts 1‑1/2 in inlets for a sink/shower and discharges through a small‑diameter line; verify venting, trap, and tie‑in details with your local code official.
• Noise and care: Listed around 35–45 dBA; routine care includes avoiding non‑flushables and following the manual’s maintenance guidance.

Shop the Ocean Luster variants in this group

Use these links to open the exact bundle contents and finish/size options. The model names below summarize the orientation, cabinet/base inclusion, and door finish. Always check the product page for the final, current components list.

• Ocean Luster — Left-shelf vanity + 36x24 lighted cabinet — Matte Black door
• Ocean Luster — Left-shelf vanity + 36x24 lighted cabinet — Brushed Gold door
• Ocean Luster — Left + 36x24 cabinet — Brushed Gold door + 60x30 base
• Ocean Luster — Left + 36x24 cabinet — Brushed Gold door + 60x32 base
• Ocean Luster — Left + 36x24 cabinet — Brushed Gold door + 60x36 base
• Ocean Luster — Left-shelf vanity + 36x24 lighted cabinet — Brushed Nickel door
• Ocean Luster — Left-shelf vanity — Matte Black door
• Ocean Luster — Left-shelf vanity — Brushed Gold door
• Ocean Luster — Left — Brushed Gold door + 60x30 base
• Ocean Luster — Left — Brushed Gold door + 60x32 base
• Ocean Luster — Left — Brushed Gold door + 60x36 base
• Ocean Luster — Left-shelf vanity — Brushed Nickel door
• Ocean Luster — Right-shelf vanity + 600W upflush
• Ocean Luster — Right-shelf vanity + 600W upflush — Matte Black door
• Ocean Luster — Right-shelf vanity + 600W upflush — Brushed Gold door

Considering familiar alternatives? Here’s the context

• Sliding door: Mainline 56–60 in frameless sliders from DreamLine and Delta also use 5/16 in (8 mm) tempered glass, similar to the CALYZ door used here, and follow ANSI safety glazing practice.

• Lighted cabinet: Feature sets (tri‑CCT, defog, outlets/USB, soft‑close) are comparable to well‑known lighted cabinets such as Kohler’s Verdera series, which also rely on UL/cUL electrical listings.

• Upflush macerator: Published performance for the 600W unit (up to ~29 ft vertical/~295 ft horizontal) is stronger on paper than common listings from familiar macerators (often ~15–25 ft vertical/~150 ft horizontal). As always, design your run with head‑loss calculations, follow the installation manual, and meet local code for venting and GFCI‑protected power.

What buyers liked

From public discussions about macerating bathrooms and frameless sliders, shoppers most often praised:

• Avoiding concrete demo by using an upflush for basement baths; quick, above‑floor installs when permits and routing are planned up front.
• Bright, even lighting and reliable defogging from a lighted cabinet; outlets/USB inside the cabinet tidy up counters.
• A cohesive look by matching a Matte Black, Brushed Gold, or Brushed Nickel slider to faucets and accessories.
• Smoother installs when the shower base includes the drain and flange and the door kit covers 56–60 in openings.